CMC 10431 is a double sided adhesive tape with good adhesion to siliconized surfaces. Both adhesive layers are ageing resistant and can be applied to silicone mats and profiles. CMC 10431 is also qualified as splicing tape in converting films and papers. The PET liner is easily removed from the strip coated red adhesive which leaves a finger lift on the edges of each tape roll.
Property
Value
Backing material
polyester (PET)
Colour side 1
red (not over full tape width)
Colour side 2
colourless, hazy (full tape width)
Substrate thickness in mm
0.023 ± 10%
Total thickness in mm
0.125 ± 15%
Adhesive properties
Property
Value
Type of adhesive side 1
polysiloxane, modified, red, strip-coated
Type of adhesive side 2
polysiloxane, modified, colourless, hazy
Adhesive strength in N/cm according to internal method PV 1006-32 (180° peel from steel)
≥ 2 (for either side)
Adhesive strength on siliconized paper in N / 25 mm (based on AFERA 5001)
≥ 2.5 (for either side)
Thermal properties
Property
Value
Temperature performance (max.) in °C
-40 bis +130
Short term temperature performance in °C (ca. 1 hour)
175
Insulation class according to IEC 60085
B
Electrical properties
Property
Value
Breakdown voltage based on IEC 60243-1 in Veff.
6'000
Mechanical properties
Property
Value
Tensile strength in N/cm
≥ 35
Elongation at break in %
≥ 80
Other properties
Property
Value
Liner
PET film 50 µm, siliconized on either side
The technical data are average values and do not replace the user's own testing. Subject to change without notice. The PDF data sheet is binding.