Polyester adhesive tape with heat resistant rubber adhesive. Peelable from many surfaces without leaving any residue, even after exposure to warmth.
Property
Value
Backing material
polyester (PET)
Colour
colourless
Substrate thickness in mm
0.036 ± 10%
Total thickness in mm
0.086 ± 10%
Total weight in g/m²
95 ± 10%
Adhesive properties
Property
Value
Type of adhesive
rubber
Adhesive strength in N/cm according to internal method PV 1006-32 (180° peel from steel)
≥4
Adhesive strength in N/25 mm (FTM 1) ≥9 after 20 min
(180° peel from steel) ≥ 10 after 24 h
Property
Value
Separating force from liner in N/50 mm (FTM 3)
≤ 0.6
Thermal properties
Property
Value
Shear adhesion failure temperature (SAFT) according to internal method PV 1006-30 (500 g load, shearing area 25 x 25 mm²)
ca. 125°C
Temperature performance (max.) in °C
80
Electrical properties
Property
Value
Breakdown voltage based on IEC 60243-1 in Veff.
≥ 5'000
Mechanical properties
Property
Value
Tensile strength in N/cm
≥ 60
Elongation at break in %
≥ 60
Other properties
Property
Value
Liner
siliconized paper
Important note: Given the wide variety of surfaces and processing conditions we highly recommend customer specific tests concerning clean removabilty. This data sheet does not constitute a general confirmation that the tape can be removed without residues from the respective substrate after bonding!
The technical data are average values and do not replace the user's own testing. Subject to change without notice. The PDF data sheet is binding.