CMC 15100 – Technical Data Sheet
Transferable silicone adhesive film, resistant against moisture, UV light and chemicals.
Product description
Transferable silicone adhesive film, resistant against moisture, UV light and chemicals. Good adhesion to low energy surfaces, good diecuttability.
Adhesive properties
| Property | Value |
|---|---|
| Type of adhesive | polysiloxane, modified |
| Colour | colourless, transparent |
| Thickness of the adhesive in mm | ca. 0.050 |
| Adhesive strength in N/cm according to internal method PV 1006-32 (180° peel from steel) | ≥ 4 (*) |
Thermal properties
| Property | Value |
|---|---|
| Minimum application temperature | 10°C |
| Shear adhesion failure temperature (SAFT) according to internal method PV 1006-30 (1 kg load, shearing area 25 x 25 mm²) | ca. 120°C |
| Temperature performance | -40°C bis +180°C (**) |
| Short term temperature performance (ca. 1 hour) | 200°C (**) |
| Other characteristics | The adhesive is supplied with two PET film liners. |
(*) This value applies to a measurement with a PET film of 50 microns as substrate.
(**) Basically feasible temperature performance, but always depending on the conditions of the application. Customer specific tests are strongly recommended!
The technical data are average values and do not replace the user's own testing. Subject to change without notice. The PDF data sheet is binding.